-
About UsQingdao Junpeng Petrochemical Equipment Manufacturing Co., Ltd. was established on February 10, 2010 with a registered capital of 51 million yuan. It is located in the beautiful tourist city of Qingdao.
-
ProductsQingdao Junpeng Petrochemical Equipment Manufacturing Co., Ltd. was established on February 10, 2010 with a registered capital of 51 million yuan. It is located in the beautiful tourist city of Qingdao.
Products
The water bath heater is a special heating device designed to meet the special needs of oil fields. It is mainly used in the oil and gas gathering and transportation system to heat crude oil and natural gas to the required process temperature for transportation, sedimentation, separation, dehydration, and primary processing. It features a wide variety of models and configurations, compact structure, complete functions, and wide applicability, making it an ideal heating device.
Vacuum heating furnace is a kind of oilfield heating equipment developed by our company, which is not only suitable for crude oil and natural gas heating. The equipment has a compact structure and complete functions, and can realize automatic, manual and intelligent control. The heat transfer medium is closed-loop circulation, and no water needs to be added during operation. According to the change of medium load, the heating capacity can be automatically adjusted. It is an ideal heating equipment for oil and gas fields.
Phase change (positive pressure) heating furnace
Phase change (positive pressure) heaters, also known as steam phase change heaters, consist of two parts: a horizontal, internally fired, wet-back, three-pass fire tube heater and a steam phase change heat exchanger. These heaters can be configured in two ways: with the steam phase change heat exchanger either integrated into or positioned above the fire tube heater.
Organic heat transfer fluid (thermal oil boiler)
An organic thermal fluid heater is a new type of special boiler, also known as a heat transfer oil furnace. It has low-pressure, high-temperature operating characteristics, and its heating temperature can reach 340℃ in the liquid phase or 400℃ in the gas phase. Organic thermal fluid heating can be used in various production scenarios where uniform and stable heating is required and direct flame heating is not allowed, with process heating temperatures between 150℃ and 380℃. A horizontal oil/gas-fired organic thermal fluid heater uses oil and gas as fuel and heat transfer oil as the medium. It utilizes a hot oil circulation pump to force the medium to circulate in the liquid phase, transferring heat energy to the heat-using equipment before returning to the heater for reheating. It achieves high operating temperatures at low pressures and allows for high-precision control of the medium's operation. The system has high thermal efficiency, and due to its modular overall installation, operation and maintenance are convenient. It is a safe, efficient, and energy-saving ideal heating equipment. Fuel, after ignition by the burner, produces high-temperature flames that enter the inner coil to form a radiation heating surface. After passing through the rear of the inner coil, it rotates 180° and enters the annulus between the inner and outer tubes to form a convection heating surface. Then, it enters the second annulus between the middle and outer coils at the front of the annulus. Finally, it is discharged into the atmosphere through the chimney at the rear of the second annulus.
Contact Us
Sales Tel: +86-0532-58710666
Sales Tel: +86-13335063629
After-sales Tel: +86-0532-58710332
After-sales Tel: +86-13969678003
Email: qdjp-zh@163.com
Address: Qingdao High-tech Industrial Development Zone, New Materials Group
Copyright © 2025 Qingdao Junpeng Petrochemical Equipment Manufacturing Co., Ltd